Publicité
Les langues disponibles
Les langues disponibles
VALIDATION OF THE CLUTCH INSTALLA-
TION
Once the clutch has been installed, it is important to
check the alignment of the two pulleys (Clutch pulley
(item 1) and snowblower pulley (item 2). The clutch
106143 has two grooves to position the belt. You
must use the one closest to the engine. The two
following figures illustrate two types of wrong pulley
alignments. A wrong pulley alignment can be resolved
by loosening the bolts securing the engine and
moving the engine. If this is the case, it is very
important to retighten all the bolts.
Parallel pulley alignment error
Angular pulley alignment error
FI_106178-106179
PRODUCT # 106178-106179-107971
CLUTCH INSTALLATION
Instructions Sheet
IMPORTANT: Make sure the clutch is not in contact
with the guard and the bolts. Rotate the clutch from left
to right and it must move freely up to the stopper.
Publicité
