Maytag PER5710BAW Manuel De Mise En Service page 6

CONNECTING THE RANGE
FIGURE 6
3-Wire Service Cord or Conduit Installation
1. Insure that the copper ground strap IS CONNECTED
between the middle post of the main terminal
connection block and the range chassis.
2. The middle wire of the service cord or ground lead of
3-wire conduit MUST connect to the neutral (middle)
post of the main terminal block. The other two wires of
ACCEPTABLE - 3 WIRE PLUG INSTALLATION
the service cord or conduit connect to the outside
posts of the main terminal connection block. Polarity is
unimportant.
3. An appropriate strain relief for service cord or conduit
MUST be attached to the conduit plate.
FIGURE 6
-6-