Publicité
Les langues disponibles
Les langues disponibles
3.
Installation and Start Up
3.1 Warmer Location
Locate the warmer on a flat and stable surface and to a proper height over the ground which allows the user to access with
comfort and security. For a perfect functioning as well as an easy operation and cleaning of the warmer it is advisable to
keep a minimal distance of space .
Do not place the warmer in places where it can be subject to excessive dust, rain, mechanical vibrations or blows.
3.2 Electrical Installation
Check that the electrical data that appear in the characteristics plate of the warmer fit with the electricity supply (figure 4).
The warmer must be connected to a properly grounded outlet which complies with the current regulations. The electrical line
of the place must be protected with a magnetothermal switch adapted to the power absorved by the warmer, as well as to a
differential relay adapted to the characteristics of the installation.
Control that the voltage, cable cross section and magnetothermal switch power characteristics are correct.
To unplug the power cord from the mains, pull from the plug, never from the cord itself.
WARNING!: Injuries or damage caused as a consequence of improper installation of the warmer can not be consi-
dered responsibility of the manufacturer.
Figure 3
1.300 W
50/60 Hz
1.300 W
60 Hz.
Figure 4
20
230 V
115 V
Publicité
