Eu Declaration Of Conformity - stayer CPT3000E Instructions D'emploi

=Cutting capacity
45º
= Cutting capacity 90º
= Cutting capacity 45º
= Weight
L = Sound power level
WA
L = Sound pressure level
PA
= Vibration
The values givenarevalid for nominalvoltages [U]230/240
V-50/60 Hz - 110/120 V - 60Hz. For lower voltage and
models for specific countries, these values can vary.
Please observe the article number on the type plata of
your machine.The trade names of the individual machines
may vary.
NoiseNibration lnformation
Noise determined according to EN 60745.
The typical sound pressure level of appliance determined
with a filter A product are: Sound pressure level 99 dB(A);
sound power level 100 dB(A). Tolerance K=3 dB.
Wear hearing protection!
Total vibration values (vector sum of three directions)
determined according to EN 60745: Sanding drywal
ah=4 m/s2, K= 1,5 m/s2.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare
one tool with another. lt may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is used
for different applications,with different accessories or
poorly maintained, the vibration emission may differ.
This may significantly increase the exposure leveloverthe
totalworking period.
An estimation of the levelof exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce theexposure level over the total
working period.
ldentify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories,keepthe hands warm, organisation of
work pattems.
ENGLISH
25

6.2 EU declaration of conformity

The undersigned:: STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: 902 91 86 81
CERTIFIES
That the machine:
SIERRA CIRCULAR
Type:
Models: CPT3000E
I declare under our responsibility that the product
described under "Technical Data" is in accordance with
the following standards or standardized documents: EN
60745-1, EN 60745-2-5, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3, de acuerdo con las regulacio-
nes 2006/42/CE, 2011/65/EU, 2014/30/EU.
Ramiro de la fuente
Director Manage
25
September 14, 2016