Hilti C 7 Mode D'emploi page 15

All manuals and user guides at all-guides.com
Service
▶ Have the appliance serviced by a qualified repair person using only genuine Hilti spare parts. This
ensures that the safety of the product is maintained.
3 Description
3.1 Product overview
3.2 LED display elements on the charger
Operating status indicator (1)
LED lights up green
LED flashes red
The LED lights up red
LED does not light up.
Charge state indicator (2)
LED flashes green
LED lights up green
LED does not light up.
3.3 Intended use
The product described is a battery charger for Hilti Li-ion batteries of the type B 7. It is designed to be
connected to power outlets providing an AC voltage (alternating current) of 220 to 240 volts.
The batteries approved for use with this product can be found in the technical data.
3.4 Items supplied
Charger, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group.
4 Technical data
4.1 Product properties
Cooling
Mains (AC) voltage
AC frequency
*440647*
Printed: 03.12.2018 | Doc-Nr: PUB / 5069448 / 000 / 02
1
2
The charger is in operating condition.
The battery is too cold (< 0 °C) or too hot (> 50 °C) and is not charg-
ing.
The charger switches automatically into the charging mode as soon
as the battery reaches the appropriate temperature.
No power supply or the charger is defective.
Unplug the supply cord from the power outlet and then plug the
supply cord into the power outlet again.
If the LED still does not light up, contact Hilti Service.
The battery will be charged.
The battery is fully charged.
The battery is not correctly plugged in or is defective.
Remove the battery and insert it again in the battery compartment.
If the LED still does not light up, contact Hilti Service.
440647
Charger
@
Cord
;
Battery compartment
=
Operating status indicator
%
Battery state of charge indicator
&
Battery type B 7
(
Cooling by convection
220 V ... 240 V
50 Hz ... 60 Hz
English 11