Publicité
Les langues disponibles
Les langues disponibles
10
QUALITY OF CUT
10.9 RIFLING OR TRAMLINING __________________________________________________
NOTE: Arrow indicates direction of travel.
Probable Cause
Reel and/or bedknife unevenly worn.
Missing, loose, or overtorqued bedknife screws.
Mowing (ground) speed is too fast.
10.10MISMATCHED CUTTING UNITS ______________________________________________
NOTE: Arrow indicates direction of travel.
Probable Cause
HOC inconsistent from one cutting unit to another.
Difference in mower ride height side to side.
58
All manuals and user guides at all-guides.com
Rifling or tramlining is a pattern of varying cutting heights,
resulting in a wave-like cut appearance, usually due to
heavy contact points across a reel and/or bedknife.
Inspect bedknife and reel. Sharpen or replace reel and
bedknife as necessary.
Install, replace or tighten bedknife screws to proper
torque setting.
Reduce mowing (ground) speed.
Mismatched cutting units is a pattern of varying cutting
heights, resulting in a stepped cut appearance, usually
due to mismatched HOC (height-of-cut) adjustment from
one cutting unit to another.
Check/adjust HOC on cutting units.
Check/adjust tire inflation pressure.
Remedy
Remedy
Publicité
