Publicité
GB
Handling
Before use, always check all screws and plug-in connections as well as the corresponding
safety devices for correct fit.
Instruct children in the correct use of the product and draw their attention to possible dangers.
Adjust the height of the saddle to the child's height (see page 17).
Do not transport anything on this vehicle.
Use environmentally-friendly substances to clean this product. You must not use aggressive
or corrosive substances.
When leaving the unicycle on floors containing solvents or which have been glued with such
solvents (e.g. PVC), they may possibly stain it due to a chemical reaction with the natural rub-
ber. If in doubt, place some cover material underneath the wheels.
Ensure that the air pressure in the tyres is correct (2.5 - 3,5 bar); too low an air pressure will
increase wear and makes riding more difficult!
Assembly of the toy vehicle
Please ensure that the vehicle will only be used after the assembly has been carried out
correctly and checked by an adult.
The vehicle must be assembled carefully by an adult person. Study the assembly instruc-
tions carefully before beginning work. Assemble the vehicle in the exact sequence shown
by the letters in the diagrams. This is essential for the safe function and use of the scooter
Please note that there is always a danger of injury when working with tools or doing
manual work. Therefore please be careful when assembling this machine.
Ensure that your working area is free of possible sources of danger, for example don't leave
any tools lying around. Always dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if children play with plastic bags!
Bolt all the parts together loosely at first, and check that they have been assembled correctly.
Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten
nuts completely against resistance (locking device). Then check that all screw con-
nections have been tightened firmly. Attention: once locknuts have been unscrewed they no
longer function correctly (the locking device is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
List of spare parts page 18
When ordering spare parts, always state the full item number, spare-partnumber, the quan-
tity required and the S/N of the product.
Example order: item no.
....................
Please keep original packaging of this item, so that it may be used for transport at a later
date, if necessary.
Goods may only be returned after prior arrangement and in (internal) packaging, which
is safe for transportation, in the original box if possible.
It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if fastening material (bolts,
nuts, washers etc.) is required, this should be clearly stated on the order by adding the
6
All manuals and user guides at all-guides.com
/ spare-part no. 70121470 / 1 pieces / S/N
08750-500
Publicité
