MAINTENANCE INSTRUCTIONS
@
Clean lint screen before and after each cycle.
if dryer does not operate, check the following:
@
Removing accumulated lint:
@
Electrical supply is connected.
From inside the dryer cabinet:
@
Circuit breaker is not tripped or house fuse is
not blown.
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done
by a qualified person.
Door is closed.
Controls are set in a running or "on" position.
From the exhaust vent:
START button has been pushed firmly.
Lint should be removed every 2 years, or more often,
For gas dryers, check that gas supply shut-off valves are set
depending on dryer usage.
in open position.
@
Keep area around dryer clear and free from combustible
materials, gasoline, and other flammable vapors and
liquids.
@
Keep dryer area clear and free from items that would
obstruct the flow of combustion and ventilation air.
IF YOU NEED ASSISTANCE
Contact your authorized Maytag® Commercial Laundry distributor. To locate your authorized Maytag® Commercial Laundry
distributor, or for web inquiries, visit www.MaytagCommercialLaundry.com.
If you cannot locate your distributor, the Commercial Laundry Support Center will answer any questions about operating or
maintaining your dryer not covered in the "Installation Instructions."
Just dial 1-800 NO BELTS (1-800-662-3587) — the call is toll free.
When you call, you will need the dryer model number and serial number. Both numbers can be found on the serial-rating plate
located in the dryer door opening.
26