Publicité
Les langues disponibles
Les langues disponibles
CHANGING TO A 30- OR 60-MINUTE TIMING CAM
* def Sawin asc ofc l e Cheetos
Electrical Shock Hazard
Disconnect power before making cam changes.
Failure to follow these instructions can result in death
or electrical shock.
Coin-slide models: You can install the 30-minute or 60-minute
timing cam (shipped with dryer) as follows:
1. Unplug dryer or disconnect power.
2. Unlock meter case.
3. Turn the timing cam by hand until the V-shaped notch lines
up below the ratchet tooth.
7. Press cam down in place on clock shaft. Make sure that
V-shaped notch clears the ratchet tooth.
4, Insert a narrow, flat-blade screwdriver under the timing cam
near the clock shaft. Gently lift cam straight up and off shaft,
making sure that the V-shaped notch clears the ratchet
tooth.
8. Close and lock the meter case.
9. Plug in dryer or reconnect power.
25
Publicité
