Progress Lighting AirPro P250038 Manuel D'installation page 8

Hanger
bracket
Figure 8
5.
Make the Electrical
Connections
WARNING: To avoid possible electrical shock,
Safety cable
be sure electricity is turned off at the main fuse
box before wiring.
Step 1. Motor to House Supply Wires Electrical
Canopy
Connections:
(Neutral) from the outlet box to the WHITE wire
marked "AC in N" from the motor. (Fig. 9)
Step 2. Connect the BLACK wire (Hot) from
the outlet box to the BLACK wire marked "AC
in L" from the motor. (Fig. 9)
Secure all wire connections with the plastic wire
nuts provided.
Connect the WHITE wire
Outlet Box
White (Neutral)
Black (Hot)
Black ("AC IN L")
White ("AC IN N")
Figure 9
Green or bare
copper (ground)
Ground (green)
(Connect to
ground wire on
hanger bracket if
no house ground
wire exists.)