LENCO ClassicPhono TT-43 Manuel De L'utilisateur page 6

Location of Controls
1. Platter: Place your record here.
2. 45 RPM Adapter Holder: Holds the included 45 RPM adapter. When not using the
adapter, please place it in this holder.
3. Tonearm: The fixed tonearm can be raised and lowered by hand, or by moving the raise
/ lower lever.
4. Arm Clip: This specially designed arm clip secures the tonearm while at rest or when not
in use. The arm clip has been designed to remain in the up position while unlocked.
5. Raise / Lower Lever: Raises and lowers the tonearm.
6. Autostop switch: This switch turns autostop on or off. When autostop is on, the platter
will start spinning when the tonearm is placed over the record and stop spinning when
the record has reached the end. When Autostop is off, the platter will always spin
regardless of the position of the tonearm.
Note: If your vinyl record stops before it reaches the end of the music, turn Autostop to the
off position for this particular record. This is generally recommended for 45 RPM records.
7. 33 / 45 / 78 RPM Switch: This switch controls the speed of the turntable platter.
Note: For best results when playing 78 RPM vinyl records, use a 78 RPM stylus (sold
separately). Only use a 78 RPM stylus with 78 RPM vinyl records.
6