Renfert Basic mobil Mode D'emploi page 12

2.6 Risk to health as a result of dust
Dust emissions may result in damage to health.
en
⇒ Operate the unit with a suitable extraction unit. The extraction unit must be adapted to the dust that oc-
curs.
3 Scope of delivery
1 Basic mobil
1 Foot switch (only for no. 2914-3050 / 2914-3250)
1 Connection set
1 Operating instructions with attachments
1 Sample blasting abrasive
4 Accessories
Cobra aluminium oxide
1594-1105
1594-1205
1594-2220
1584-1005
1583-1005
1583-1020
1587-1005
1587-1020
1585-1005
1585-1020
Rolloblast glass beads
1594-1305
1594-2312
1589-1005
5 Startup
The mobile sandblasting unit is connected to the compressed air or to the recyclable blaster Vario-Jet
risp. Vario basic.
Risk of injury!
Loose tubes may hit objects around them.
Tubes must be connected first to the unit.
Only press the foot switch after all tubes have been connected.
Close the shut-off valve before start-up (Fig. 11).
5.1 Setting up and Connecting the Unit with Foot Switch
⇒ Inspect the tank for proper installation (Fig. 1).
⇒ Connect the foot switch / sandblasting unit (red) (Fig. 2a, 2b, 2c).
⇒ Connect the foot switch / air supply (P) (Fig. 3).
⇒ Do not bend or kink the hose (Fig. 4)!
5.2 Setting up and Connecting the Unit without Foot Switch
⇒ Inspect the tank for proper installation (Fig. 1).
⇒ Connect the compressed air hose / sandblasting unit (red) (Fig. 2a, 2b, 2c).
⇒ Connect the compressed air hose / air supply (P) (Fig. 3).
⇒ Do not bend or kink the hose (Fig. 4)!
25 µm [500 mesh], white 5 kg canister
50 µm [270 mesh], white 5 kg canister
50 µm [270 mesh], white 20 kg bucket
90 µm [170 mesh], white 5 kg canister
110 µm [150 mesh], white 5 kg canister
110 µm [150 mesh], white 20 kg bucket
125 µm [115 mesh], pink 5 kg canister
125 µm [115 mesh], pink 20 kg bucket
250 µm [60 mesh], white 5 kg canister
250 µm [60 mesh], white 20 kg bucket
50 µm [400 - 200 mesh], 5 kg canister
50 µm [400 - 200 mesh], 12.5 kg canister
100 µm [170 - 100 mesh], 5 kg canister