Mircom TX3 Serie Manuel D'installation page 76

3.14 Installation d'autres composants
optionnels et de remplacement
Les composants optionnels sont énumérés ci-dessous. Tous les documents
(par exemple LT-5997) sont disponibles sur le site http://www.mircom.com.
RS-485. An RS-485 terminal lets you easily connect multiple Touch Screen
and lobby and card access controllers across a network. The RS-485 terminal
consists of + (positive), − (negative), and S (Shield) connections. See section
3.15 on page 77.
Camera. For instructions on installing an IP camera, see section 3.16 on page
79.
RPL-MD-1074 Replacement Display for TX3-TOUCH-F22-C/D and TX3-
TOUCH-S22-C/D. See LT-6076.
RPL-SC-420005 Replacement Display for TX3-TOUCH-F22-E/F and
TX3-TOUCH-S22-E/F. See LT-6088.
TX3-DELTA5 Card Reader. See section 3.17 on page 82.
TX3-GPM Guard Phone Module. See LT-972.
TX3-USB-AD Kit. See LT-6027.
TX3-WIEGAND-OUT. LT-6682.
TX3-CX-1NP Single Door Control Module. See LT-5997.
RPL-LK-WR Replacement Lockset for TX3-TOUCH-S15B-WR(-A) and
TX3-TOUCH-S15S-WR(-A). See LT-6649.
TX3-TOUCH-WR-BB Mounting Box for TX3-TOUCH-S15B-WR(-A) and
TX3-TOUCH-S15S-WR(-A). See LT-6912.
TX3-CF-003 Fan. For instructions on installing a fan in the 22" Touch Screen,
see LT-6074 Installing the Fan in the 22" Touch Screen.
Two door controller network board. See LT-981A.
Replacement lobby controller board. For details on the lobby controller
board, see LT-969.
RPL-SC-420002 Replacement display for TX3-TOUCH-S15B-WR(-A)
and TX3-TOUCH-S15S-WR(-A). See LT-6656.
RPL-TOUCH-WR-WK Replacement Reader and Camera Window Kit for
TX3-TOUCH-S15B-WR(-A) and TX3-TOUCH-S15S-WR(-A). See
LT-6659.
Manuel d'installation de l'écran tactile TX3
76
Système d'écran tactile et configuration