Publicité
Les langues disponibles
Les langues disponibles
4.
Insert the glass carafe horizontally into the coffee maker. Put it on the keep-warm plate, under the
drip stop.
5.
Plug the power cord into the outlet and press the on/off button. The indicator light will light up and
the coffee maker will start brewing. The display will show "BREW".
You can remove the carafe from the coffee maker at any chosen time for a maximum of 30 seconds
to pour coffee. The appliance will stop dripping automatically.
6.
The coffee is ready about one minute after the coffee stops dripping from the appliance.
7.
The final amount of coffee will always be a little less than the amount of water you put in, because
the ground coffee absorbs water.
8.
Be careful while pouring, the coffee is hot right after brewing.
9.
For safety reasons it is considered wise to keep the lid on the carafe. This way the coffee also stays
warm.
10. The device will keep the coffee warm for up to 40 minutes. Afterwards, the device will shut off
automatically. To maintain an optimal coffee taste, it is best to serve the coffee right after brewing.
11.
Always make sure that the coffee maker is switched off and unplug the power cord from the outlet
when the appliance is not in use.
POINTERS FOR GREAT COFFEE
·
A clean coffee maker is essential to make great tasting coffee. Clean the appliance regularly according
to the guidelines. Always use fresh, cold water in the coffee maker.
·
Store coffee in a dry and cool place.
·
Do not reuse any coffee, as this will greatly affect the taste of your coffee. We also do not recommend
reheating coffee.
SETTING THE TIME
1.
Put the plug in the socket. The display will show "12:00".
2.
Press the programming button to set the time. The display will show "CLOCK".
3.
To set the correct time, press the hours button and the minutes button.
4.
Once the time has been set, press the programming button twice to confirm the time.
SETTING THE TIMER
1.
Prepare the appliance to set coffee as indicated under chapter "use" but do not press the on/off
button yet.
2.
Make sure that the current time is set correctly.
3.
Press the programming button twice to set the timer. The display will show "PROG".
4.
To set the timer, press the hours button and the minutes button.
5.
Hold the programming knob down for 3 seconds to confirm the timer. The indicator light will now
turn green.
6.
The current time remains visible on the display. If you want to check to see what time you have set
the timer at, then press the programming knob twice.
7.
The coffee will start percolating at the time set using the timer. At that moment, the green indicator
light will turn off. The red light will illuminate and 'BREW' will appear on the display.
22
DO1120K
Publicité
