OHAUS Scout STX123 Mode D'emploi page 36

STX
1.800.561.8187
Single Header Only
Set the printing criteria.
OFF = Headers will be printed for every print requirement
ON = Headers will be printed once a day
Print Options*
Set the printing criteria.
Printer = Print data to a printer
PC = Print data to a PC
Note: If language selection is set to Chinese, Japanese or Korean, these options
shall match the actual peripheral device.
Auto Print
Set the automatic printing functionality.
OFF
ON Stability
Interval (seconds) = printing occurs at the defined time interval.
Continuous
When ON Stability is selected, set the conditions for printing.
Load
Load and Zero
When INTERVAL is selected, set the time interval using the numeric
keypad.
Settings of 1 to 3600 seconds are available.
Print Content
Enter this sub-menu to define the content of the printed data.
See details below:
www.
= disabled
= printing occurs each time the stability criteria are
met.
= printing occurs continuously.
= Prints when the displayed load is stable.
= Prints when the displayed load or zero reading is
stable.
.com
information@itm.com
EN-33