OHAUS Scout STX123 Mode D'emploi page 18

STX
The balance calculates water density based on
the water temperature value entered (internal
lookup table). Measure the actual water
temperature using a precision thermometer.
Press Back to return to the Density
Determination home screen.
To begin the Density Determination process,
press Start.
Step 1 of 2 – Weigh the Sample in Air.
Press Start. Follow screen instructions, and then press Accept to store the dry sample weight
("in air").
Step 2 of 2 – Weigh the Sample Submerged in the Liquid.
Follow the screen instructions, then press Accept to store the sample weight (submerged in
liquid).
1.800.561.8187
www. .com
information@itm.com
EN-15