Samsung NX58565 Serie Mode D'emploi page 67

Changing the oven light
The oven light is a standard 40-watt appliance bulb. It will automatically come on
when the oven door is opened. It can also be turned on and off when the oven
door is closed by pressing the Oven Light pad on the oven control panel.
NOTE
The oven light will not work during a self-cleaning cycle.
WARNING
Disconnect electrical power to the range before replacing the oven light. This will
prevent any personal injury due to electric shock.
Oven light cover Oven light cover
and bulb and bulb
1. Make sure the oven and the light bulb
are cool.
2. Open the oven door.
NOTE
If the oven racks are in the way, they can
be repositioned or removed before you
change the oven light.
3. Turn the glass light cover in the rear
upper-right corner counterclockwise to
remove it.
4. Turn the bulb counterclockwise to
remove it from its socket.
5. Replace the bulb with a new 40-watt
appliance bulb. Turn the bulb clockwise
until it is seated securely in the socket.
6. Replace the glass light cover by turning
it clockwise until it is seated securely.
7. Close the oven door and reconnect the
electrical power to the range.
Removing and replacing the oven door
WARNING
• The oven door is very heavy. Do not lift it by the handle and be careful not
to drop the door during removal. Improper handling could result in personal
injury.
• Disconnect the electrical power to the range before removing the oven door.
This prevents the oven from accidentally being turned on while the door is
removed.
To remove the door
1. Completely open the oven door.
English 67