Samsung NX58565 Serie Mode D'emploi page 64

Maintaining your appliance
Surface burner grates and assemblies
64 English
5. Replace the control knobs in the OFF
position by pushing them straight onto
the control valve stems.
1. Turn off all controls and make sure all
parts have cooled.
2. Lift off and remove the burner grates
from the cooktop. Make note of the
burner sizes and locations of all the
surface burners.
3. Lift off burner caps from top of the
burner heads.
4. Lift the burner heads off the valve
manifolds and starter electrodes.
5. Clean all removable burner parts in
warm, soapy water. Do not use steel-
wool pads or abrasive cleaners on any
burner part.
6. Rinse thoroughly and completely dry all
parts before they are reassembled.
NOTE
• After cleaning, confirm that the burner
port openings aren't plugged.
• Shake out any excess water and then let
burner heads and caps dry thoroughly.
Placing the center burner upside down
will allow the water to drain out more
easily.
• Do not wash any burner components in
a dish washer.