Wolf Garten Accu 60 Mode D'emploi page 16

Maintenance
Replace batteries
1. Remove cover (figure L)
Place a coin in the cover slot and press
in the direction of the blade (1). Remove
the cover from above (2).
2. Replace batteries (figure M)
Remove both plugs from the batteries
(3); remove the batteries from the
shears. Place the new batteries in the
shears and connect the two plugs.
Spare parts
Order description
C-TS
Telescopic handle
ccu 8 EM
Shear blade
ccu 10 EM
Shear blade
ccu BS EM
Shrub blade
C-R
Replacement blades
ccu
Charger
Technical Data
Noise measurement at operator ear
level in accordance with EN 836.
Vibration measured at the handle
with operator according to EN 1033.
The assessed acceleration typically
amounts to:
16
All manuals and user guides at all-guides.com
Item number. Product information
Continuously adjustable from 85-120 cm.
7095 000 Result: convenient trimming without stooping.
( ccu 60, 80, 100, BS 80)
7084 095 Cutting width 80 mm ( ccu 60, 80, 100, BS 80)
7085 095 Cutting width 100 mm ( ccu 60, 80, 100, BS 80)
7095 095
Length 170 mm ( ccu 60, 80, 100, BS 80)
Result: The wheels achieve a consistent cutting height
7084 094
( ccu 60, 80, 100)
7084 916
ccu 60
7085 916 ccu 80
7086 916 ccu 100, BS 80
7086 078 ccu 60, 80, 100, BS 80
ccu 60
Lp = 72 dB
( )
< 2,5 m/s
3. Fastening the cover (figure N)
Push the lid with the projection (4) under
the edge of the shears and then press
the cover on the shears (5).
Note: Please ensure
protrudes from the shears when fastening
the cover!
ccu 80
Lp = 72 dB Lp = 72 dB
( )
< 2,5 m/s < 2,5 m/s
2 2
that no cable
ccu 100 ccu BS 80
Lp = 72 dB
( ) ( )
< 2,5 m/s
2 2