Bpt opale wide Manuel De L'utilisateur page 30

opale wide
DEVICE SETUP
L
Serial Number: F347820083A
36
The button O, is needed to manually program the system .
EN
The button P allows selection of the standard of the video signal of the system, either PAL or NTSC .
Standard PAL activated .
Standard NTSC activated .
30
All manuals and user guides at all-guides.com
Bus version: 0.10
SW version: 2.06
HW version: 1.00
Device reset
If device reset is necessary due to malfunctions, interventions or other technical
reasons . lightly press the button located in the side recess on the device's right-
hand side (see figure) .
Note:
This operation does NOT delete any programmes that will be restored when the unit
is restarted.
Other functions of the technical menu
M
Pressing the L button enables an automatic
response to intercom calls coming from other
N
extensions .
Activating the M button, in systems equipped
O
with porters, shows the
main menu .
P
The N button is needed to identify the device
if it is being programmed from a PCS/Xip using
PCS/300 software .
User Guide
and buttons on the