Beta REV-3 Mode D'emploi page 69

4
•Cleaning periodically the rebound rubber as follow:
lower/remove rebound rubber using a little screwdriver and blow with compressed
air in the spring spacer milling
•Always check the top and bottom bolts are tight.
GB
In the event of any malfunction, In the event of any malfunction, In the event of any malfunction,
In the event of any malfunction, In the event of any malfunction,
contact our authorised customer contact our authorised customer
contact our authorised customer contact our authorised customer contact our authorised customer
service network. service network. service network.
service network. service network.
WWW.PlanDeGraissage.ORG
ADJUSTMENT OF REAR SHOCK ADJUSTMENT OF REAR SHOCK
ADJUSTMENT OF REAR SHOCK ADJUSTMENT OF REAR SHOCK ADJUSTMENT OF REAR SHOCK
ABSORBER ABSORBER ABSORBER
ABSORBER ABSORBER
Adjustment of spring Ioad Adjustment of spring Ioad
Adjustment of spring Ioad Adjustment of spring Ioad Adjustment of spring Ioad
•For a more active "quicker" suspension
setting, open compression regulation
knob A A A A A
•For a more controlled "slower "
suspension setting, closed compression
regulation A A A A A
68