Publicité
Les langues disponibles
Les langues disponibles
Cooking zone timer
The cooking zone timer is connected to a cooking zone and can be set separately for each cooking zone. In contrast to the minute
minder timer the cooking zone timer switches off the cooking zone when the set time runs out.
• Switch on the hob and activate a cooking zone.
• Set the heat setting with the slider control
• Press on the TIMER key
• Press the TIMER key
there a four LED's. They indicate for which cooking zone, the cooking zone timer is set.
• Set the desired time with the slider control
• 10 seconds after the last control touch, the display will show the time of the cooking zone which runs out first (in case of
programming more than one cooking zone).
To set an extra cooking zone timer, do as follows:
• Activate another cooking zone.
• Set the heat setting with the slider control
• Press on the TIMER key
• Press the TIMER key
• Set the desired time with the slider control
• 10 seconds after the last control touch, the display will show the time of the cooking zone which runs out first (in case of
programming more than one cooking zone).
When the selected time has runs down, a signal sounds and the timer display shows [00]. The programmed cooking zone will be
switched off and [H] appears in the display if the cooking zone is hot.
The sound signal will stop automatically after 30 seconds or by operating any key.
SOUND SIGNAL
When the hob is in operation, the following activities will be signalled by means of a sound signal:
• normal key activation with a short sound signal
• continuous operation of keys over a longer period of time (10 seconds) with a longer, intermittend sound signal.
DISPLAY INDICATION
Indication on the display
. The display shows
again until the corresponding LED blinks to activate the cooking zone timer. Around the timer display
. The timer will now function as a minute minder timer.
again until the corresponding LED blinks to activate the cooking zone timer.
An error has occured. Check the notification according to the table in chapter 8.
Residual heat indication: the cooking zone is still hot.
The child lock is activated.
Fault. There is something placed on the controls or the cookware is not suitable or too small.
Place a pan on the active cooking zone or switch it off.
.
. The timer will now function as a minute minder timer.
.
.
.
Description
25
English
•
Publicité
