Télécharger Imprimer la page

Beurer BM 58 Mode D'emploi page 35

Masquer les pouces Voir aussi pour BM 58:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
The serial number is located on the device or in the battery
compartment.
Technical information is subject to change without notifica-
tion to allow for updates.
• This unit is in line with European Standard EN 60601-1-2
(In accordance with CISPR 11, IEC 61000-4-2,
IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11) and is
subject to particular precautions with regard to electro-
magnetic compatibility (EMC). Please note that portable
and mobile HF communication systems may interfere with
this unit.
• This device is in line with the EU Medical Devices Direc-
tive 93/42/EEC, the „Medizinproduktegesetz" (German
Medical Devices Act) and the standards EN 1060-1 (non-
invasive sphygmomanometers, Part 1: General require-
ments), EN 1060-3 (non-invasive sphygmomanometers,
Part 3: Supplementary requirements for electro-mechani-
cal blood pressure measuring systems) and
IEC 80601-2-30 (Medical electrical equipment –
Part 2 – 30: Particular requirements for the safety and
essential performance of automated non-invasive blood
pressure monitors).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical pur-
poses, it must be regularly tested for accuracy by appro-
priate means. Precise instructions for checking accuracy
may be requested from the service address.
12. Mains part
Model no.
LXCP12-006060BEH
Input
100 – 240 V, 50 – 60 Hz, 0.5 A max
Output
6 V DC, 600 mA, only in connection with beurer
blood pressure monitor.
Supplier
Shenzhen Iongxc power supply co., ltd
Protection This device is double insulated and protected
against short circuit and overload by a primary
thermal fuse.
Make sure to take the batteries out of the com-
partment before using the mains adapter.
Polarity of the the DC voltage
connection
Double insulated / equipment class 2
Enclo-
Equipment enclosed to protect against con-
sures and
tact with live parts, and with parts which can
Protective
become live (finger, pin, hook test).
Covers
The operator shall not contact the patient and
the output plug of AC mains adapter simulta-
neously.
35

Publicité

loading