Télécharger Imprimer la page

Beurer BM 58 Mode D'emploi page 24

Masquer les pouces Voir aussi pour BM 58:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
• During the blood pressure measurement, blood circula-
tion must not be stopped for an unnecessarily long time.
If the device malfunctions, remove the cuff from the arm.
• Avoid any mechanical restriction, compression or bend-
ing of the cuff line.
• Do not allow sustained pressure in the cuff or frequent
measurements. The resulting restriction of the blood flow
may cause injury.
• Ensure that the cuff is not placed on an arm in which the
arteries or veins are undergoing medical treatment, e.g.
intravascular access or therapy, or an arteriovenous (AV)
shunt.
• Do not use the cuff on people who have undergone a
mastectomy.
• Do not place the cuff over wounds as this may cause fur-
ther injury.
• You can either use the blood pressure monitor with bat-
teries or with a mains part. Please note that data transfer
and data storage is only possible when your blood pres-
sure monitor is supplied with power. As soon as the bat-
teries are empty or the mains part is disconnected from
the power supply, the blood pressure monitor loses the
date and time.
• To conserve the batteries, the monitor switches off auto-
matically if no buttons are pressed for one minute.
• The device is only intended for the purpose described in
these instructions for use. The manufacturer is not liable
for damage resulting from improper or careless use.
Storage and Care
• The blood pressure monitor is made up of precision elec-
tronic components. Accuracy of readings and the instru-
ment's service life depend on careful handling.
– You should protect the device from impact, moisture,
dirt, major temperature fluctuations and direct exposure
to the sun's rays.
– Never drop the device.
– Do not use near strong electromagnetic fields, i.e. keep
it away from any radio systems and mobile phones.
– Only ever use the cuffs provided with the monitor or
original replacement cuffs. Otherwise erroneous results
will be recorded.
• Do not press any buttons until the cuff is in position.
• If the instrument is not used for any length of time, we
recommend removing the batteries.
24

Publicité

loading