Klarstein ALESSIA 10045309 Mode D'emploi page 32

EN
32
INSTALLING ACTIVATED CARBON FILTER
1
With an activated carbon filter,
unpleasant food odours can be
filtered out of the air in internally
vented extractor hoods.
2
To be able to install the filter, you
must first remove the grease filter.
Press the fastener and pull it down.
3
Put the activated carbon filter on
the fan and turn it clockwise to
tighten. Repeat the procedure on
the other side. Make sure the filter
is tight, otherwise it could come
loose and pose a hazard. Note: If an
activated carbon filter is installed, the
extraction performance decreases
slightly.