Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
3.3
Information/Status LEDs
Battery Status
Wi-Fi Connection
Status
Operating Status
The Cleaner goes into deep sleep after 8 days of inactivity to protect the battery. When all indicators are
off, the cleaner is in sleep mode. Re-set the cleaner on the charging base to wake it up. If this does not
work, see troubleshooting.
3.4
Charging Station Status
Solid Green
Solid Red
Blinking Green
Page 8
Solid Green
Blinking Green
Solid Orange
Blinking Orange
Blinking Red
Blinking Blue
Solid Blue
Blinking Blue
Blinking Red
Floor and walls (2 h 30 min)
Floor Only (1 h 30 min)
Base is receiving power
Charging is in progress
Charging station needs
to be replaced
Polaris
FREEDOM
®
Fully charged.
Ready to run a full cycle (2 h 30 min).
Not fully charged. May not run a complete floor & wall
cycle.
Very low battery level. Charge required. Cannot run
cleaner.
Charging error. Cleaner is too hot.
Pairing.
Connected to Wi-Fi.
Out of Water: Ready to submerge, start cleaning.
In Water: End of cycle. Waiting for removal from pool.
Error. See app or troubleshooting.
Additional cleaning modes available in-app. If an
app mode is chosen, both lights are illuminated.
Figure 5.
Charging Station Status LED
Cordless Robotic Cleaner | Owner's Manual
™
Publicité
