Télécharger Imprimer la page

Polaris FREEDOM EB37 Serie Manuel Du Propriétaire page 6

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
Section 2. Cleaner Specifications
2.1
General Specifications
The general specifications for the cleaner are as
follows:
WARNING
Only use the battery charger supplied with the cleaner.
Charge Station Supply
Voltage
Supply Voltage
Battery Capacity
Operating Power
Cleaner Size (WxDxH)
Weight of Cleaner
Packed Weight
Filtration
Cycle Lengths
Charge Temperature
Water Temperature
Range
Operating Depth
*Class II: An appliance with double insulation
or reinforced insulation that does not require
grounding.
Contents
The packaging should contain the following items:
• Polaris Cleaner
• Charging Station
• Removal Hook
Figure 1.
Contents
Page 6
110-240 VAC; 50/60 Hz
Class II*
29.4 V DC
9.6 Ah
58 W
16 x 16.5 x 11 inches
(41 x 42 x 28 cm)
20 lbs. (9.1 kg)
33 lbs. (15.5 kg)
All-purpose filter canister
Variable programming
Max 95°F (35°C)
Min 40°F (5°C)
Max 95°F (35°C)
Min 55°F (13°C)
Max 13 ft. (4 m)
Min 15 in. (40 cm)
Polaris
FREEDOM
®
Section 3. General Cleaner
Operation
3.1
Assemble the Charging Station
1.
Insert the top of the charging station foot
(marked with a blue dot) into the top rear of
the charging station (also marked with a blue
dot). Push the lower part of the foot into the
lower cavity of the charging station until clip
is secure.
2.
Attach the hook clip to either charging station
foot. Attach the hook to the clip.
3.
Run cable through either foot cable slot.
Cable slots
Figure 2.
Assemble Charging Station
CAUTION
To prevent damage to the cleaner, be sure to adhere to the following
guidelines:
• Remove the cleaner from the pool after the cleaning cycle is
completed.
• Store out of direct sunlight or inclement weather.
• For retrieval, pickup at waterline when notified by app or use the
manual retrieval hook.
• Take additional care when lifting the cleaner out of the pool.
It becomes heavier when filled with water.
• Always remove the cleaner from pool when super chlorinating
or adding acid.
• Do not handle cleaner while it is in operation.
• Ensure that the cleaner is not in running mode before handling.
Cordless Robotic Cleaner | Owner's Manual

Publicité

loading