Polaris FREEDOM EB37 Serie Manuel Du Propriétaire page 15

Polaris FREEDOM Cordless Robotic Cleaner | Owner's Manual
® ™
4. Use a pair of scissors to cut the tabs 3/4 inch
from the heel so that they are no higher than
the cleaning blade.
5. Repeat the procedure to install the second
brush.
Figure 24. Cut Tabs
6.5 Replacing Tracks
1. Check the wear indicator or if the tracks are
loose. Pull on the inside of the old track to
remove the track lip from the front wheel.
Figure 25. Pull the Old Track Over the Wheel
2. Remove the old track from the front wheel,
then remove track from the rear wheel.
Figure 26. Remove the Old Track
3. Replace the track on the wheel by positioning
the rib toward the body of the cleaner.
Figure 27. Track Replacement Orientation
ENGLISH
Page 15