Polaris
FREEDOM
Cordless Robotic Cleaner | Owner's Manual
®
™
6.2
Clean the Filter Canister
The filter canister should be cleaned at the end of
each cycle befire debris dries.
1.
Push the cover lock and lift the cover until it is
secured in the vertical position.
Figure 17. Lift Cleaner Cover
2.
Remove the filter canister assembly from the
body.
3.
Empty all debris from the filter canister, then
rinse the filter and the cleaner using a hose.
Figure 18. Remove and Wash the Filter Canister
NOTE: Periodically, remove the filter canister and clean
thoroughly with soapy water and a soft bristle
brush.
4.
Replace the filter canister into the cleaner.
5.
Store the cleaner on the charging station out
of direct sunlight.
Figure 19. Store Cleaner on the Charging Station
6.3
Storage
Store the cleaner in a protected and dry place with
an ambient temperature between 50°F (10°C) and
70°F (21° C), out of reach of children, pets, other
foreign objects, etc.
• Never store or dry the cleaner in direct sunlight.
• DO NOT expose cleaner to fire, excessive
temperatures, ignition sources, or pool and spa
chemicals.
• DO NOT leave the cleaner in the water when not
in use.
Long-Term & Winter
Remove the cleaner from the pool and drain all
water to avoid freezing water damage (freeze
damage is not covered under warranty).
For long term storage, it is recommended to
store the cleaner at 80-100% of battery capacity
(indicated by solid GREEN battery LED).
You may either:
• Leave the cleaner and charging station
connected until next use.
• Disconnect and recharge the cleaner at the start
of season.
Store cleaner and charging station out of direct
sunlight, rain or inclement weather.
ENGLISH
Page 13