Uline H-10306 Instructions De Montage page 8

10. Attach one bracket of wall anchor (R) to back of
top of credenza using two M4 x 20 mm screws.
Mark holes on wall where plastic anchors are to
be located. Drill holes using 5/16" drill bit. Mount
opposite bracket of wall anchor to wall with two
M4 x 40 mm screws and two plastic anchors. Tighten
cable tie to prevent tipping. Repeat for opposite
side of credenza. (See Figure 19)
Figure 19
Top
PAGE 8 OF 24
ASSEMBLY CONTINUED
Wall
R
Back
1-800-295-5510
uline.com
Completed Lateral File and
Cabinet Credenza Assembly
Completed Double Cabinet
Credenza Assembly
0223 IH-10306