Wilfa PROBAKER TIMER Instructions page 22

TROUBLESHOOTING GUIDE
EN
Problem
Bowl is loose
when mounted
Bowl is hard
to lock
Machine stops
during kneading
Timer display
does not show
INSTRUCTION MANUAL · PROBAKER TIMER
Possible Cause
Missing rubber ring in
the bowl mounting base
Bowl is not properly
locked
Grease or water
between bowl and
mounting base
Debris between the
base and bowl
Too heavy loading
(Probaker instantaneously
measures how heavy the
machine is loaded and
cuts the power when the
loading is too high)
Motor overheating
(The motor is equipped with
a thermal protection system
that cuts power if the motor
temperature gets too high)
After a longer break (30
minutes) the machine goes
in standby, and only the
clock button will show.
22
Action
Reattach the rubber ring
Turn bowl clockwise until it
cannot be moved further
Clean rubber ring as described
in "Cleaning Instructions"
Clean rubber ring as described
in "Cleaning Instructions" and
clean the ring and the base of
the machine with a moist cloth
1. Set speed to 0
2. Reduce the doughs
resistance by either:
a. Adding liquid
b. Removing part of the
dough
c. Kneading at lower speed
Unplug the device and let
the machine cool down for
30 minutes before restarting
To activate the timer, press
the clock-button. The timer
will automatically start when
increacing the speed.