Qlima MS-AC 5001 Manuel D'utilisation page 89

man_MS-AC 5001 ('23) V3.indd 89
2. The system automatically recognizes your country/ area. You can also select your country
code manually. Enter your mobile phone number/ email address and tap "Next".
3. If you choose the mobile phone number option, then enter the verification code in the
message sent to you by SMS. Set a password as prompted and press "Confirm" to finish your
registration.
ADD DEVICE THROUGH NETWORK
1. Power conditioner on, when conditioner under standby mode, press the "FAN"button for 3
seconds to enter Wifi-connect mode.
2. Open Smart Home app and tap "+" in the upper right to add a new
device through the network.
3. Ensure the device 's indicator light rapidly flashes (2 times per second) and tap "Confirm
light is rapidly flashing".
4. Select Wi-Fi network (note: network must be 2.4 Ghz band) and enter
the password .The device will commence the pairing process and connect to the app.
4
89
19-07-2023 10:12