mundoclima MUCR-H8 Serie Manuel D'installation Et L'utilisauter page 61

INSTALLATION MANUAL
How to adjust the air inlet direction? (From rear side to under-side)
1. Take off the ventilation panel and flange.
Ventilation panel
3. When installing the filter mesh, fit it into the
flange as illustrated in the following figure.
How do I adjust the static pressure of the fan?
OPTION 1:
Manually using the "SP" function of the AU-KJR-120G / TF-E wired remote control.
Please, follow the steps:
- While the device is stopped, press the "COPY" button for 3 seconds.
Copy/
Follow me
- Press the "+" or " - " button until "SP" is selected.
- +
- - Press the "CONFIRM" button.
Confirm
- Press the "+" or "-" button to select the desired static pressure setting (SP1 to SP4)
- +
- - Press the "CONFIRM" button.
Confirm
Note: To exit the setting press the "BACK" or "ON / OFF" button. It you do not press any key and wait 15 seconds it will also exit.
Air return flange
All the figures in this manual are for explanation purpose only. They may be slightly different from the air
conditioner you purchased.The actual unit shall prevail.
2. Change the mounting positions of the
ventilation panel and air return flange.
Air return flange
NOTE
61
Ventilation panel