Motorola APX NEXT Mode D'emploi page 19

Function
Contacts
Dynamic Priority (Conventional
Only)
Emergency
Fall Alert Clear
In-Call User Alert
Light/Flip
Location
Mode Select (MS01– MS13)
Monitor (Conventional Only)
Nuisance Delete
Private Call (Trunking Only)
Priority Dispatch
Radio Profiles
Record Playback
Rekey Request
Remote Monitor
Repeater Access Button (RAB)
(Conventional Only)
Reprogram Request (Trunking On-
ly)
Request-To-Talk (Conventional
Only)
Description
Allows you to access the Contacts menu.
Allows any channel in a Scan List (except for a Priority-One
channel) to temporarily replace the Priority-Two channel.
Allows you to send or cancel Emergency Alarm to the dis-
patcher.
Allows you to clear the Fall Alert mode alarm and exit Fall
Alert feature.
Allows the radio to remain muted to affiliated talkgroup calls
while operating on the current Trunking Personality or con-
ventional channel.
To turn on the display backlight on and off, press the button.
To flip the screen orientation of the top display, press and
hold the button.
Displays the current location (latitude, longitude, time, and
date), and also the distance and bearing to another location,
or toggles GPS/Location between on and off.Toggles the
GPS/Location capabilities on and off.
To change to the preset Mode Select zone and channel,
press the button.
When the Preconfigurable Preset Zone and Channel field
is enabled, to save the current zone and channel to one of
the Mode Select menus, press and hold the preferred Mode
Select menu.
Monitors a selected channel for all radio traffic until the func-
tion is disabled.
Temporarily removes an unwanted channel from scan list,
except for priority channels and the designated transmit
channel.
Allows you to dial the programmed ID (number) and initiate
the Private Call.
Allows you to call the dispatcher on a different talkgroup.
Allows you to access a set of programmed visual and audio
settings of the radio.
Allows you to saves and playback recorded calls.
Notifies the dispatcher that a new encryption key is needed.
Enables the system administrator to remotely command a
targeted radio.
Allows you to manually send a repeater access codeword.
Notifies the dispatcher that a new dynamic regrouping as-
signment is needed.
Notifies the dispatcher that you want to send a voice call.
MN005642A01-AU
Chapter 3 : Radio Overview
19