Publicité
Les langues disponibles
Les langues disponibles
2 Tap
FAB→Dialer.
3 To change the call type, tap
4 Enter the number of the target radio.
5 To send Remote Emergency, press the PTT button.
If the ID of the target radio is valid, your radio displays Sending remote emergency... and saves
the ID as the last Remote Emergency ID.
If the ID of the target radio is invalid, your radio displays an invalid ID notification.
If your radio is in one of the following states, your radio plays a tone.
•
Receive-only Channel
•
Transmit Inhibit
•
Out of Range
•
Imbalance Coverage
If your radio receives acknowledgment, your radio displays a positive notification.
If your radio does not receive acknowledgment from the target radio, your radio displays a negative
notification.
12.9.3
Sending Remote Emergency from Menu Feature Launcher
Procedure:
1 From the Menu Feature Launcher widget, tap
Your radio displays the Call List.
2 Select the required contact.
3 To send remote emergency, press the PTT button.
If the ID of the target radio is valid, your radio displays Sending remote emergency... and saves
the ID as the last Remote Emergency ID.
If the ID of the target radio is invalid, your radio displays an invalid ID notification.
If your radio is in one of the following states, your radio plays a tone.
•
Receive-only Channel
•
Transmit Inhibit
•
Out of Range
•
Imbalance Coverage
If your radio does not receive acknowledgment from the target radio, your radio displays a no-
acknowledgment notification.
More→Remote Emergency.
Remote Emergency.
MN005642A01-AU
Chapter 12 : Emergency Operation
61
Publicité
