Brandt AD289XT1 Guide D'utilisation page 4

99625941_ML_A.qxd 18/11/02 13:47 Page 4
All manuals and user guides at all-guides.com
I
nstallation conditions
If you have an air outlet to outdoors:
Your hood can be connected to this outlet through an
evacuation duct (enamel finished, in aluminium, flexi-
hose or other non-inflammable material), with internal
diameter 150 mm ( not supplied ).
Otherwise, an adapter may be used to connect your
hood to an evacuation duct with internal diameter 125
mm (supplied with your hood).
If you have no air outlet to outdoors:
All our units can be used in recycling mode ( with no
outlet to outdoors ).
In this case, an active carbon filter should be instal-
led, to eliminate smells .
These filters are available from your Brandt retailer,
and the appropriate part number is shown on your
duct identification plate (see inside the hood).
Width:
900 mm
Depth:
500 mm
Overall height under conduit:
280 mm
Min. - Max. height:
651 mm -1106mm
Outlet outer diameter:
150 mm (with non-return valve)
or 125 mm.
4