Toro Recycler 60 V MAX 20361 Manuel De L'utilisateur page 17

Bagging the Clippings
Use the grass bag when you want to collect grass and leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove it; refer to
Installing the Grass Bag
1. Raise and hold up the rear deflector (A of
2. Install the grass bag, ensuring that the pins on the bag rest in the notches on the handle (B of
3. Lower the rear deflector.
Removing the Grass Bag
To remove the bag, reverse the steps in
Side-Discharging the Clippings
Use side discharging for cutting very tall grass.
If the grass bag is on the machine, remove it; refer to
Installing the Side-Discharge Chute
Lift up the side deflector and install the side-discharge chute (A and B
Removing the Side-Discharge Chute
To remove the side-discharge chute, lift up the side deflector, remove the side-discharge chute, and lower the
side-discharge deflector.
Figure 14).
Figure 14
Installing the Grass Bag (page
Removing the Grass Bag (page
Figure 15
15
Removing the Side-Discharge Chute (page
15).
15).
Figure 15).
15).
Figure 14).
g235812
g233435