KitchenAid KFP1433A Instructions D'utilisation page 12

ASSEMBLING THE FOOD PROCESSOR CMD + SHIFT CLICK TO CHANGE COPY
Installing the multipur_pose blade or_ dough blade
IMPORTANT: The multipurpose blade and dough blade can only be used with the work bowl.
Place the blade on the power shaft.
1
Rotate the blade so it falls into place on
the power shaft.
Install the work bowl cover, being sure
3
it locks into place.
12
Push to lock: Press down firmly on the
2
blade until it is down as far as it will go.
NOTE:
The multipurpose blade features an
internal seal that fits tightly over the center of
the work bowl.