Tripp-Lite PDUMH15AT Manuel Du Propriétaire page 3

2. Installation
2.2 Connecting the PDU
The PDU includes two AC power inputs: Primary
and Secondary. The Primary input cord is
permanently attached to the rear of the PDU
(120V models).
IEC-320-C14 inlet is used for the primary input
of the 230V model.
The Secondary input cord is detachable and
connects to the IEC power inlet
of the PDU (PDUMH15AT, PDUMH15ATNET -
IEC-320-C14 inlet; PDUMH20AT,
PDUMH20ATNET, PDUMH20HVAT,
PDUMH20HVATNET - IEC-320-C20 inlet).
2.2.2
To connect the Secondary input cord:
1. Form a loop in the Secondary cord
secure the juncture of that loop to the Primary
cord with a zip tie. Be sure the zip tie is
B
secured around the Secondary and Primary
cords, as well as through the loop created in
the Secondary cord
C
Give the cord as much slack as possible
between the loop and the cord's outlet.
2. On Models PDUMH20HVAT and
PDUMH20HVATNET, both cords should be
tied to the Cable Retention Tray. (See
diagram).
3. Once you've secured the two cords together
and ensured that the Secondary cord has a
comfortable amount of slack, insert the
Secondary cord outlet into the IEC power inlet.
2.2.3 Connect Input Plug Adapters (Optional
- Models PDUMH20AT, PDUMH20ATNET
Only): The PDU includes two adapters that
convert one or both of the L5-20P input plugs to
5-20P input plugs. Connecting the adapters is
optional. The PDU will function normally without
connecting the adapters.
2.2.4
Connect Secondary Input Cord to PDU:
Although the PDU will operate without
connecting the Secondary input cord, the
Secondary input is required for the PDU's
Automatic Transfer Switch function.
16-11-163-933688.indb 3
All manuals and user guides at all-guides.com
( continued )
2.2.1 at the rear
and
A
. (See diagram). Note:
3
Primary Input (120V Models)
PDUMH15AT
2.2.1
PDUMH15ATNET
Primary Input (230V Model)
2.2.1
230V PDUMH20HVAT & PDUMH20HVATNET
A
B
C
2.2.2
2.2.3
PDUMH15AT,
2.2.4
PDUMH15ATNET
PDUMH20AT
PDUMH20ATNET
PDUMH20AT,
PDUMH20ATNET
PDUMH20AT,
PDUMH20ATNET
1/3/2017 4:40:08 PM