König Electronic SEC-TRANS20 Mode D'emploi page 9

All manuals and user guides at all-guides.com
Quad mode
This function is only useful when more as 1 camera is in use (optional products)
QUAD mode: Unavailable channels will be displayed as blank screen.
To leave QUAD mode, press the
= CAM4 ; = CAM3;
Set the scan time to QUAD .
(OFF / 5 sec / 10 sec / 15 sec / QUAD)
Make sure all available cameras are set to
ON
buttons to go to specific channel.
= CAM1; = CAM2
9