König Electronic SEC-TRANS20 Mode D'emploi page 4

All manuals and user guides at all-guides.com
Connecting:
Camera
1. Connect the antenna and the DC power plug to the camera. Plug the AC plug into a wall
outlet. (only use the supplied AC/DC adapter)
2. The camera powers on automatically and the power LED (red) lights up
3. If the receiver is also powered on and the wireless connection is good, the link LED
(blue) lights up as well.
Receiver to TV
1 Connect the antenna and the DC power plug to the receiver.
Plug the AC plug into a wall outlet. (only use the supplied AC/DC adapter)
2. The receiver powers on automatically and the power LED (green) lights up. If the camera
is not powered on or there is no connection with the camera, the receiver signal LED
lights up green, indicating there is no signal
3. Connect the audio/video connection cable with the yellow (video) and the white (audio)
plug to the AV input of a TV or monitor.
Connect the 3.5mm plug to the AV out of the receiver.
AV Mode
Video
Note:
Do not connect the USB cable at the same time when the
audio/video connection cable already is connected to a TV
or monitor.
TV
Audio
4
AV-Out