König Electronic SEC-TRANS20 Mode D'emploi page 10

All manuals and user guides at all-guides.com
Pairing camera(s)
This function is only relevant when more as 1 camera is in use (optional products)
Pairing key
Select pair CAM in the menu and select
the camera.
Only assign one camera to one channel.
Channel memory will be overwritten if
another camera is assigned the same
channel.
Press the button to start the pairing
procedure.
System will count down within 60 seconds
to pair the camera.
The pairing LED on the receiver starts
flashing (red)
Press the Pair button on the back of camera.
After pairing is completed, the
receiver switches automatically
to the assigned channel
10