König Electronic SEC-TRANS20 Mode D'emploi page 5

All manuals and user guides at all-guides.com
Receiver to PC or notebook
Note: Do not connect the AC/DC adapter to the receiver when using
the USB connection. The receiver is powered automatically by PC or
notebook. Disconnect the audio/video connection cable.
1. Connect the antenna to the receiver.
2. Connect the USB plug to the computer and the mini USB plug to the USB out of the
receiver.
3. The receiver powers on automatically and the power LED (green) lights up. If the camera
is not powered on or there is no connection with camera, the receiving signal LED lights
up green, indicating there is no signal
Note: Using USB output will switch image and system control from receiver to PC. The
i-SEC Guarding software installation CD is provided with the product. For details, please
refer to i-SEC Guarding software manual.
Operation:
(Up / Down / Left / Right)
In zoom mode, pan and tilt buttons
In menu mode, cursor buttons
Enter MENU, Exit MENU
Zoom IN/OUT
Zoom IN > QVG A size
Zoom OUT > VGA size
Camera select/Pair mode
In View mode, manually select from the
available camera channels
In Pair mode, assign and pair private
camera to specified channel
Up
Left
Zoom
Camera
Select/ Pair
(Pair mode)
Down
5
Right
Menu