Berkel 330M Manuel Du Propriétaire page 19

4. Start­the­machine­(only­blade­rotation).
5. Move­the­lever­(3)­from­the­"0"­position­to­the­"sharpening"­position­and­hold­it­in­this­position­
for­10-­15­seconds.
6. Move­the­lever­(3)­to­the­"burr"­position­for­2-3­seconds­to­remove­the­sharpening­burr.
7.­ Put­the­lever­back­to­the­"0"­position­and­stop­the­blade­movement.
8.­ Raise­the­cover­again,­turn­it­180°­and­put­it­back­to­its­original­position.
9. Clean the blade and the machine.
NOTE:­ Do­not­insist­more­than­2-3­seconds­with­the­burring­operation­so­as­to­avoid­damage­to­
the edge of the blade.
LUBRICATING THE GUIDE BARS OF THE CARRIAGE AND OVERPLATE
• After each cleaning operation of the machine
put­a­few­drops­of­oil­in­the­hole­(1)­of­the­
plate­(2).
• Put­a­few­drops­of­oil­along­the­sliding­bar­(3)­
of the carriage.
• Turn­the­flywheel­briefly.
NOTE:­ Only­use­white­Vaseline­oil.­Do­not­
use­vegetable­oils.
All manuals and user guides at all-guides.com
330M Slicer o /o
wner peraTor
m • 19
anUal