Berkel 330M Manuel Du Propriétaire page 13

Assembly of the flywheel:
1.­ Move­the­machine­carriage­all­the­way­towards­the­operator.
2. Take­out­the­taper­pin­from­the­flywheel­shaft.
NOTE:­ Hammer­the­pin­at­the­tapered­end­(smaller­diameter).
3. Insert­the­flywheel­so­that­the­maneuvering­handle­is­at­the­top­and­to­the­left,­as­shown­in­the­
figure,­compared­to­the­hole­for­the­taper­pin.
4. Check­the­correct­correspondence­of­the­flywheel­shaft­sleeve­holes.
5. Insert­the­pin­into­the­sleeve­as­shown­in­the­figure­with­the­tapered­end­(smaller­diameter)­
towards­the­sleeve­itself.
6. Hammer­the­opposite­end­of­the­pin­(larger­diameter)­inserting­it­all­the­way.
All manuals and user guides at all-guides.com
330M Slicer o /o
wner peraTor
m • 13
anUal