Berkel 330M Manuel Du Propriétaire page 18

MAINTENANCE AND REPAIRS
GENERAL INFORMATION
The operator is allowed to carry out the following maintenance:
• Blade­sharpening,­periodically;­the­interval­and­length­of­the­sharpening­obviously­depend­on­
the­use­of­the­machine­(work­times­and­type­of­product­used).
• Lubrication­of­the­carriage­guide­bars­and­overplate:­weekly.
• Adjustment­of­the­blade­drive­chain:­as­necessary,­see­the­relative­paragraph.
• Adjustment­of­the­bevel­gear­pair:­as­necessary,­see­the­relative­paragraph.
Maintenance­to­be­carried­out­exclusively­by­personnel­authorised­by­the­manufacturer­is­as­follows:
• Replacing the blade
• Replacing the sharpener grindstones
• Replacing the chain
• Repairing­the­structural­parts,­repairing­and/or­replacing­components­under­the­base
SHARPENING THE BLADE
Proceed as follows as soon as it is noticed that there is less cutting capacity:
Danger­of­cutting!­Use­protective­gloves­which­are­resistant­to­cutting­and­tearing­and­concentrate­on­
the­job­at­hand.­PAY­CAREFUL­ATTENTION!
1.­ Open­the­slice­deflector­(1).
2. Clean the blade with denatured alcohol or hot water.
3. With­the­knob­(2)­raise­the­cover­of­the­sharpener,­turn­it­180°­and­lower­it­again.
18 • 330M Slicer o /o
wner peraTor
All manuals and user guides at all-guides.com
WARNING
m
anUal