Publicité
Les langues disponibles
Les langues disponibles
8416521
ASSEMBLY
NOTE: When this manual refers to a part number, it refers to the included Parts Identification section.
1.
Ensure the ON/OFF switch (#3) is in the OFF/0 position.
2.
Slide spray gun holder (#2) onto unit. (Fig. 2)
3.
Connect the high pressure hose (#8) to the pump outlet (#1). (Fig. 3)
4.
Slide detergent bottle holder (#12) onto unit. (Fig. 4) Place detergent bottle (#13) in holder. Put
detergent suction tube (#11) into the detergent bottle.
5.
Connect high pressure hose to the high-pressure hose connector (#4) on the
spray gun (#6). (Fig. 5)
6.
Insert spray wand (#7) into spray gun. Press in against the spring tension and twist clockwise
into locked position. (Fig. 6)
7.
Connect garden hose to unit's water inlet (#15). (Fig. 7)
Fig. 2
Fig. 5
NOTE: The water hose must be at least 1/2 in. in diameter. Flow rate of water supply must not
fall below 2 GPM. The water supply temperature must not exceed 40°C (104°F).
8.
Connect garden hose to the cold water source and turn water on completely. (Fig. 8)
9.
Plug the power cord (#14) into an outlet. (Fig. 9)
10. Press the RESET button; the indicator should read ON. Press the TEST button; the indicator
should now read OFF. Press the RESET button for use. We recommend testing the GFCI each
time you use your pressure washer.
WARNING: Do not use the unit if the above test fails.
Fig. 8
Visit www.princessauto.com for more information
1.6 GPM @ 1,300 PSI Electric Pressure Washer
Fig. 3
Fig. 6
Fig. 4
Fig. 7
Fig. 9
V 2.9
7
Publicité
