Abus TVHD80120 Guide Rapide page 17

13 14
All hard drives which are to be used for Click Init, then confirm the successful
recording must be initialized before- initialisation with OK. Exit the screen
hand. To initialise the hard drives, tick by pressing OK, then go to the next
the corresponding drive. screen by pressing Next.
32
All manuals and user guides at all-guides.com
15
Chose the channel which shall be
configured at Camera. Please note
that you still have to configure the
arming schadules in the recorder
menu. For further information please
read the user manual.
English
16 17
Please click in the checkbox Start Re- For copying these settings to other
cording to activate the record. Choose camera channels please click on
between a durable record (Normal) or Copy. Click in the checkbox of the
a record with motion detection (Mo- camera channels you want to
tion Detection). In the menu of the transfer the settings to and click on
recorder you can define areas and OK to activate these settings.
the sensivity of the motion detection.
English
18
Click on OK to finish the initial set-up.
33