Abus TVHD80120 Guide Rapide page 12

Connections
Blue: Connected camera is recording
USB ports
For external USB 2.0 devices
(e.g. mouse or external disk drive)
Directional keypad
Press and hold the OK key
for five seconds to turn the
Recorder operating keys
recorder on or off
Function keys for operating
the recorder
22
All manuals and user guides at all-guides.com
Camera selection keys Status LED
White: Camera is connected Displays the operating
state of the recorder
Not lit: No camera connected
Receiver for the remote
Jog Shuttle
Inner ring: Single frame playback
Outer ring: Change the playback speed
AUDIO OUT
Cinch audio output (synchronised
with main video signal output)
AUDIO IN
Cinch inputs
1 1 2 2 3 3
AUDIO
IN
HD-SDI
Cinch audio input (is not
IR receiver
VIDEO IN
recorded, only for network
BNC input for
control signal
HD-SDI cameras
BNC connector for video output (used for connecting
a monitor as an alternative to the VGA / HDMI output)
English English
RS-232
Serial port – no
functionality
HDMI
HDMI monitor connection
4 4 AUDIO OUT AUDIO OUT LINE IN LINE IN eSATA eSATA
RS-232 RS-232
VIDEO OUT VIDEO OUT
VIDEO IN VIDEO IN
HDMI HDMI VGA VGA LAN1 LAN1
VIDEO IN VIDEO IN
LINE IN USB
Connection for
USB devices
RJ45 connection for a
transmission)
network connection
VIDEO OUT
VGA monitor connection
(9-pin), video output signal
eSATA
Connection for an
external HDD
ALARM IN / OUT
RS-485 connection for PTZ cameras, max.
16 alarm inputs, max. 4 relay outputs
OUT OUT
IN IN
Power on/off
LAN
On/Off switch
Mains power connection
VGA 100-240 V AC, 50-60Hz
23