Publicité
Les langues disponibles
Les langues disponibles
7
8 8
192.168.0.20
To assign the address data automati-
If your router does not assign the
cally, tick the DHCP box. The addresses
address data automatically, then enter
are then assigned automatically by
the data manually as shown in the
the router (provided this function is
following steps. The Screenshots shows
supported). In this case, proceed from
an example of devices to be connected
point 13 onwards.
with corresponding IP addresses.
30
All manuals and user guides at all-guides.com
9
192.168.0.25
192.168.0.1
The first three positions of the IP
address must correspond to the de-
fault gateway value. The last position
specifies the device activated through
the default gateway (e.g. the recor-
der), and is defined individually for
each device. For example, enter xxx.
xxx.xxx.64 for recorder 64.
10
The Subnet Mask is a network segment
where IP addresses with identical net-
work addresses are used. The standard
value here is usually 255.255.255.0.
English
English
11
12
Call up "Run" in the start menu.
The DNS Server translates an Internet
Enter "cmd" in the new window,
address into an IP address. Enter the
then "ipconfig" in the prompt
default gateway value under Prefer-
which follows. Enter the default
red DNS Server.
gateway value in the recorder
screen.
31
Publicité
